McQuay M5MAC Guide de dépannage Page 30

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 90
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 29
McQuay Service Guide Book
29
2. Selecting Operating Mode
Press the
MODE
key to select the type of operating mode. Consecutive press of the key
switches the operation over
COOL
”, “
HEAT
”, “
AUTO
”, “
DRY
” and “
FAN
3. Fan Speed Selection
Press the
FAN
key until the desired fan speed is achieved.
4. Sleep Mode Setting
Press the
SLEEP
key to activate sleep mode. This function is available under
COOL
,
HEAT
&
AUTO
mode.
When it is activated in
COOL
mode, the set temperature will be increased 0.5°C after 30mins,
C after 1 hour and 2°C after 2 hours.
When it is activated in
HEAT
mode, the set temperature will be decreased C after 30mins,
C after 1 hour and 3°C after 2 hours.
5. Temperature Setting
To set the desired room temperature, press or to increase or decrease the
set temperature in the range of 16°C to 30°C.
Press both and simultaneously to toggle between °C and °F setting.
6. Air Swing
Press the
SWING
key to activate the automatic air swing function.
7. Time Setting
Real time clock
Press the
CLOCK
key once to activate set clock mode.
Press again to disable set clock mode.
Under set clock mode, the time of the present day can be set by pressing the respective
MINUTE
,
HOUR
and
DAY
key.
7 days timer
Press the
ON TIMER
key to activate autoON timer mode. Under this mode, press the
respective
MINUTE
,
HOUR
and
DAY
key to select the time of the week when the air-
conditioning unit is to automatically start running. Press
ON TIMER
key again to save the
setting.
Press the
OFF TIMER
key to activate autoOFF timer mode. Under this mode, press the
respective
MINUTE
,
HOUR
and
DAY
key to select the time of the week when the air-
conditioning unit is to automatically stop running. Press the
ON TIMER
key again to save the
setting.
Then to activate the 7 days timer, press and hold the
TIMER ACTIVE
key until the word
“TIMER ACTIVE” appears on the LCD screen. Repeat the same step to disable the 7 days
timer.
8. Other Function
Key Lock
Press the
MINUTE
key 3 times consecutively to activate the key lock. A KEY LOCK” symbol
will appear on the LCD screen. At this point, only the ON/OFF key is valid.
To disable the key lock, again press the MINUTE key 3 times consecutively.
Vue de la page 29
1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 89 90

Commentaires sur ces manuels

Pas de commentaire