McQuay M5MAC Guide de dépannage Page 27

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 90
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 26
McQuay Service Guide Book
26
5.7 Sequential Controller
Outlook
Operating Guide
1. “ON/OFF” Switch
Press once to start the air conditioning unit.
Press again to stop the unit.
The operation lamp next to the key lights up and goes off respectively when the unit is
running or not running.
Caution:
In the case when the
ON/OFF
key is pressed immediately after the operation is
stopped, the unit will not restart until 3 minutes later to protect the compressor.
2. Selecting Operating Mode
Press the
MODE
key to select the type of operating mode. Consecutive press of the key
switches the operation over
COOL
”, “
HEAT
”, “
AUTO
” and “
FAN
3. SAVE Mode
Press the
SAVE
key to select the energy saving function. This option is only available for
COOL
”, “
HEAT
” and “
AUTO
” modes.
4. Auxiliary Electric Heater
If the
HEAT
mode provides insufficient heating to a room even at the highest temperature
setting (30°C), press the HEATER key to activate the auxiliary electric heater. For models
with two heaters, consecutive press of the key allows the selection of one or both heaters
active.
A : Time display
B : Error indication
C : Compressor running display (up
to 4 compressors)
D : Key lock display
E : Heat display (up to 2 heaters)
F : Energy saving mode display
G : Compressor deforst cycle display
(up to 4 compressors)
H : Operation mode display
I : Temperature set display
Vue de la page 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 89 90

Commentaires sur ces manuels

Pas de commentaire